StockFetcher Forums · Filter Exchange · This Is The Last Filter You Will Ever Need Part III<< 1 ... 2 3 4 5 6 >>Post Follow-up
WALLSTREETGENIUS
983 posts
msg #41879
Ignore WALLSTREETGENIUS
modified
3/13/2006 2:35:02 AM

When it comes to "Bottom fishing," it doesn't get any better than this. Just put the final touches on the new filter. I think most of you will like what you see. Peace.


RIGGS



Fetcher[show stocks where close is above 40
60 day slope of close is above 0
Do not draw 60 day slope of close
draw EMA(13)
Set{Bullpower, high minus ema(13)}
Set{Bearpower, low minus ema(13)}
set{BLb,days(BullPower is above BullPower 1 day ago,100)}
set{BLa,days(BullPower is below BullPower 1 day ago,100)}
set{BLxBL, BLa - BLb}
set{BRb,days(BearPower is above BearPower 1 day ago,100)}
set{BRa,days(BearPower is below BearPower 1 day ago,100)}
set{BRxBR, BRa - BRb}
Bullpower has been decreasing the last 1 day
Bearpower has been increasing the last 1 day
Bearpower is below 0
Draw Bullpower
Draw Bearpower
add column BLxBL
add column BRxBR
Force Index(2)is increasing
average volume(90)is above 100000
volume is above 100000
sort column 3 DESCENDING
date offset is 2/15/06

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE momentum(12) */

set{moval, INDPOSITION(momentum(12), 60) * 100}

/* NORMALIZE CCI(14) */

set{ccval, INDPOSITION(CCI(14), 60) * 100 }

/* NORMALIZE williams %r(10) */

set{wrval, INDPOSITION(williams %r(10), 60) * 100 }


/* DRAW THE MP CCIWLR CHART */

and draw wrval
and draw adval on plot wrval
and draw moval on plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column moval
add column wrval

adval is Above 80
ccval is Below 30
moval is Below 30
wrval is Below 30

adval is increasing
ccval is increasing
moval is increasing
wrval is increasing
]










WALLSTREETGENIUS
983 posts
msg #41896
Ignore WALLSTREETGENIUS
modified
3/13/2006 2:37:02 AM

********************************************************************************

"How many "LAST FILTERS THAT YOU WILL EVER NEED" are there going to be?"


********************************************************************************

Oh...prolly about 5 more......HeHeHe! But ya gotta admit....it's a damn good filter!



Fetcher[show stocks where close is above 40
60 day slope of close is above 0
Do not draw 60 day slope of close
draw EMA(13)
Set{Bullpower, high minus ema(13)}
Set{Bearpower, low minus ema(13)}
set{BLb,days(BullPower is above BullPower 1 day ago,100)}
set{BLa,days(BullPower is below BullPower 1 day ago,100)}
set{BLxBL, BLa - BLb}
set{BRb,days(BearPower is above BearPower 1 day ago,100)}
set{BRa,days(BearPower is below BearPower 1 day ago,100)}
set{BRxBR, BRa - BRb}
Bullpower has been decreasing the last 1 day
Bearpower has been increasing the last 1 day
Bearpower is below 0
Draw Bullpower
Draw Bearpower
add column BLxBL
add column BRxBR
Force Index(2)is increasing
average volume(90)is above 100000
volume is above 100000
sort column 3 DESCENDING
date offset is 2/15/06


/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE momentum(12) */

set{moval, INDPOSITION(momentum(12), 60) * 100}

/* NORMALIZE CCI(14) */

set{ccval, INDPOSITION(CCI(14), 60) * 100 }

/* NORMALIZE williams %r(10) */

set{wrval, INDPOSITION(williams %r(10), 60) * 100 }


/* DRAW THE MP CCIWLR CHART */

and draw wrval
and draw adval on plot wrval
and draw moval on plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column moval
add column wrval

adval is Above 80
ccval is Below 30
moval is Below 30
wrval is Below 30

adval is increasing
ccval is increasing
moval is increasing
wrval is increasing
]





RIGGS.







WALLSTREETGENIUS
983 posts
msg #41970
Ignore WALLSTREETGENIUS
3/13/2006 2:54:34 AM

Now that this filter is now almost 3 weeks old, let's just see how it's done....

Fetcher[show stocks where close is above 40
60 day slope of close is above 0
Do not draw 60 day slope of close
draw EMA(13)
Set{Bullpower, high minus ema(13)}
Set{Bearpower, low minus ema(13)}
set{BLb,days(BullPower is above BullPower 1 day ago,100)}
set{BLa,days(BullPower is below BullPower 1 day ago,100)}
set{BLxBL, BLa - BLb}
set{BRb,days(BearPower is above BearPower 1 day ago,100)}
set{BRa,days(BearPower is below BearPower 1 day ago,100)}
set{BRxBR, BRa - BRb}
Bullpower has been decreasing the last 1 day
Bearpower has been increasing the last 1 day
Bearpower is below 0
Draw Bullpower
Draw Bearpower
add column BLxBL
add column BRxBR
Force Index(2)is increasing
average volume(90)is above 100000
volume is above 100000
sort column 3 DESCENDING
date offset is 2/15/06

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE momentum(12) */

set{moval, INDPOSITION(momentum(12), 60) * 100}

/* NORMALIZE CCI(14) */

set{ccval, INDPOSITION(CCI(14), 60) * 100 }

/* NORMALIZE williams %r(10) */

set{wrval, INDPOSITION(williams %r(10), 60) * 100 }


/* DRAW THE MP CCIWLR CHART */

and draw wrval
and draw adval on plot wrval
and draw moval on plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column moval
add column wrval

adval is Above 80
ccval is Below 30
moval is Below 30
wrval is Below 30

adval is increasing
ccval is increasing
moval is increasing
wrval is increasing
]





Well, from the looks of it, it appears that all my filters consistantly show nothing but "Green" in a down and sleepy market. I wonder why that is.....Even (MSM)that's in the "red" had it's run from $45.00 to $48.73!



RIGGS










WALLSTREETGENIUS
983 posts
msg #41671
Ignore WALLSTREETGENIUS
modified
3/13/2006 3:00:09 AM

Just about 11 days ago I (RIGGS) introduced this filter to you, so take a look at it now. Bullpower/Bearpower is going to be a force much like RSI(2). Only better! In fact, since I've perfected TRO'S "ZOOM LENS," I've taken away RSI(2)and replaced it with my beloved CCI(14), and it now works better than ever!

fetcher[
Fetcher[show stocks where close is above 40
60 day slope of close is above 0
Do not draw 60 day slope of close
draw EMA(13)
Set{Bullpower, high minus ema(13)}
Set{Bearpower, low minus ema(13)}
set{BLb,days(BullPower is above BullPower 1 day ago,100)}
set{BLa,days(BullPower is below BullPower 1 day ago,100)}
set{BLxBL, BLa - BLb}
set{BRb,days(BearPower is above BearPower 1 day ago,100)}
set{BRa,days(BearPower is below BearPower 1 day ago,100)}
set{BRxBR, BRa - BRb}
Bullpower has been decreasing the last 1 day
Bearpower has been increasing the last 1 day
Bearpower is below 0
Draw Bullpower
Draw Bearpower
add column BLxBL
add column BRxBR
Force Index(2)is increasing
average volume(90)is above 100000
volume is above 100000
sort column 3 DESCENDING
date offset is 2/15/06

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE momentum(12) */

set{moval, INDPOSITION(momentum(12), 60) * 100}

/* NORMALIZE CCI(14) */

set{ccval, INDPOSITION(CCI(14), 60) * 100 }

/* NORMALIZE williams %r(10) */

set{wrval, INDPOSITION(williams %r(10), 60) * 100 }


/* DRAW THE MP CCIWLR CHART */

and draw wrval
and draw adval on plot wrval
and draw moval on plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column moval
add column wrval

adval is Above 80
ccval is Below 30
moval is Below 30
wrval is Below 30

adval is increasing
ccval is increasing
moval is increasing
wrval is increasing
]




Good luck to everyone!


RIGGS









WALLSTREETGENIUS
983 posts
msg #41704
Ignore WALLSTREETGENIUS
modified
3/13/2006 3:01:30 AM

Avery said.....

"What's the reason for the offset?

Wouldn't those stocks be old news by now?"


Avery, why do we EVER use the "offset?" I'll tell you...because we as filter builders like to show R-E-L-I-A-B-I-L-I-T-Y. Why did I change and tinker with your "WARM ZOOM LENS?" Because it wasn't reliable. So I made IT reliable. So by using the "offset," investors and traders alike can see again, RELIABILITY!
No one needed you to paste the filter without the "offset." They take filters that work and do that themselves. Traders like to see performance! So when they are able to recognize it, THEN, the "offset" disappears. Otherwise, it's just another filter.

So even though those "stocks are old news," they fit into a pattern that is a winner. Look at how many down days we've had in the last 11 days. My filter is a swing traders dream! When Bullpower/Bearpower diverge, it's more reliable than RSI(2)IMO. Now I'm sure that's debatable, but you can't argue facts. Look what happens when the two diverge. It's like magic. I've always said that. Therefor, it becomes a daytraders dream too! So who cares about "offsets" and "old news?," That's why I say "It's the last filter you'll ever need!" But thank you for taking the time anyway and good luck.


fetcher[
Fetcher[show stocks where close is above 40
60 day slope of close is above 0
Do not draw 60 day slope of close
draw EMA(13)
Set{Bullpower, high minus ema(13)}
Set{Bearpower, low minus ema(13)}
set{BLb,days(BullPower is above BullPower 1 day ago,100)}
set{BLa,days(BullPower is below BullPower 1 day ago,100)}
set{BLxBL, BLa - BLb}
set{BRb,days(BearPower is above BearPower 1 day ago,100)}
set{BRa,days(BearPower is below BearPower 1 day ago,100)}
set{BRxBR, BRa - BRb}
Bullpower has been decreasing the last 1 day
Bearpower has been increasing the last 1 day
Bearpower is below 0
Draw Bullpower
Draw Bearpower
add column BLxBL
add column BRxBR
Force Index(2)is increasing
average volume(90)is above 100000
volume is above 100000
sort column 3 DESCENDING
date offset is 2/15/06

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE momentum(12) */

set{moval, INDPOSITION(momentum(12), 60) * 100}

/* NORMALIZE CCI(14) */

set{ccval, INDPOSITION(CCI(14), 60) * 100 }

/* NORMALIZE williams %r(10) */

set{wrval, INDPOSITION(williams %r(10), 60) * 100 }


/* DRAW THE MP CCIWLR CHART */

and draw wrval
and draw adval on plot wrval
and draw moval on plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column moval
add column wrval

adval is Above 80
ccval is Below 30
moval is Below 30
wrval is Below 30

adval is increasing
ccval is increasing
moval is increasing
wrval is increasing
]





RIGGS.













WALLSTREETGENIUS
983 posts
msg #41731
Ignore WALLSTREETGENIUS
modified
3/13/2006 3:04:44 AM

Come on bashers, focus on the filter at hand and you just might make some money here.....

Listen I mentioned to all of you a while back that you needed to pay close attention to TRO'S "WARM ZOOM LENS." Back then I didn't quite understand how to use it, but I knew THERUMPLEDONE was onto something big.

He(TRO)told me that "when all four(4)lines come together at the bottom, get ready to load the boat!" Well I did and lost about 17K during the week he emailed the filter to me. To say the least I was pissed! Not to mention my boss thought I had finally lost it! Well, but I knew deep in my heart there was something about this "ZOOM LENS" that I started looking at all my stocks through ZOOM LENS, and realized something that stood out big time! THERUMPLRDONE had been misusing it, and gave me the wrong direction. I forgive you TRO! (just kidding bro!)

What you need to look for is the "adval" to be above 75 and the other 3 RSVAL, WRVAL, MOVAL to be below 30! When this happens there will be a POP! When "ADVAL"(Accumulation Distribution)is well above the other 3, it's much like DMA in that it's ringing a bell to get the other indicators up there as well.

So what are you looking for? First look at the 4 "columns." rsval, adval, moval, wrval. You want the "adval" to be above 75, and again the other three to be below 30. Then you want to look at your Bullpower/Bearpower indicators. If Bullpower is decreasing or flat, and Bearpower is INCREASING from below "0", that is your entry signal! Take a look for yourself. Also, if you see divergence between Bull & Bear Power, then you are looking at a "long" position! So all of this has been coded for you. DO NOT EVER AGAIN UNDERESTIMATE BULLPOWER/BEARPOWER! I told all of you a couple of months ago that I would find a way to incorporate this indicator into the right filter and
this is it!!!

*******************************************************************************

fetcher[
Fetcher[show stocks where close is above 40
60 day slope of close is above 0
Do not draw 60 day slope of close
draw EMA(13)
Set{Bullpower, high minus ema(13)}
Set{Bearpower, low minus ema(13)}
set{BLb,days(BullPower is above BullPower 1 day ago,100)}
set{BLa,days(BullPower is below BullPower 1 day ago,100)}
set{BLxBL, BLa - BLb}
set{BRb,days(BearPower is above BearPower 1 day ago,100)}
set{BRa,days(BearPower is below BearPower 1 day ago,100)}
set{BRxBR, BRa - BRb}
Bullpower has been decreasing the last 1 day
Bearpower has been increasing the last 1 day
Bearpower is below 0
Draw Bullpower
Draw Bearpower
add column BLxBL
add column BRxBR
Force Index(2)is increasing
average volume(90)is above 100000
volume is above 100000
sort column 3 DESCENDING
date offset is 2/15/06

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE momentum(12) */

set{moval, INDPOSITION(momentum(12), 60) * 100}

/* NORMALIZE CCI(14) */

set{ccval, INDPOSITION(CCI(14), 60) * 100 }

/* NORMALIZE williams %r(10) */

set{wrval, INDPOSITION(williams %r(10), 60) * 100 }


/* DRAW THE MP CCIWLR CHART */

and draw wrval
and draw adval on plot wrval
and draw moval on plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column moval
add column wrval

adval is Above 80
ccval is Below 30
moval is Below 30
wrval is Below 30

adval is increasing
ccval is increasing
moval is increasing
wrval is increasing
]






RIGGS




















WALLSTREETGENIUS
983 posts
msg #41745
Ignore WALLSTREETGENIUS
modified
3/13/2006 3:06:04 AM

Avery you said....

"The MOVAL below 30 is the reason your tweak is working. ADVAL above 70 just means the buyers HAVE BEEN BUYING."

********************************************************************************

First off, thank you for always sharing. "MOVAL" is NOT the "reason my tweak is working." It's the combination of Bearpower increasing & the Bullpower decreasing. While this happens, you WANT "buyers buying." This is what lifts your beautiful "ZOOM LENS." Look at any stock and see what happens when ADVAL is above 75 and the others are below 30, while both BULL/BEAR are increasing....that stock or stocks will ultimately fade after even 1 day.

The Magic is in the Elder-Rays. Your "ZOOM LENS" is just a guide line and filter set-up. And I cant believe you think the key in "ZOOM LENS" is "MOVAL." When I believe the key is "ADVAL." Because when both are below 30, there is no upper movement or interest in the stock. That's why you have to "wait for green." Well many times it's too late to get in after "waiting for green." Notice how when Bullpower decreases and bearpower increases, it usually happens after a dark candle? That's the magic!

That's why I said ealier in this thread that it's even better than RSI(2). BULL/BEAR already has a built-in divergence, while you have to look for it in RSI(2). And we already know that too many times it's just not there. This filter is so dynamic that it IMEDIATELY tells us when to get in.

Look at all the stocks that are "red" in the performance column. LOL...notice that most of them are "red" b/c they have already gone up for 2-4 days or hit the upper LR(60)? Tell me that's not dynamic! So it doesn't matter how you slice it or offset it, my filter and your "ZOOM LENS" are the ultimate "Dynamic Duo!" I dare ANYONE to challenge it! Avery, I've already put it up against this...

RSI(2)is below 1
and close above 1
and Average Volume(10) is above 300000
and volume above 100000
and 60 day slope of the close is above 0


And that filter can't hold a candle to this new filter! Avery, try daytrading with my filter. Hell, try daytrading with my filter on a down day! It just doesn't miss! As for "weekly charts", why even bother? This filter allows you to bypass most T.A. Anyway. Hey face it...."This is the last filter anyone will ever need!" LOL....TRO, thanks for stopping buy.


Fetcher[
Fetcher[show stocks where close is above 40
60 day slope of close is above 0
Do not draw 60 day slope of close
draw EMA(13)
Set{Bullpower, high minus ema(13)}
Set{Bearpower, low minus ema(13)}
set{BLb,days(BullPower is above BullPower 1 day ago,100)}
set{BLa,days(BullPower is below BullPower 1 day ago,100)}
set{BLxBL, BLa - BLb}
set{BRb,days(BearPower is above BearPower 1 day ago,100)}
set{BRa,days(BearPower is below BearPower 1 day ago,100)}
set{BRxBR, BRa - BRb}
Bullpower has been decreasing the last 1 day
Bearpower has been increasing the last 1 day
Bearpower is below 0
Draw Bullpower
Draw Bearpower
add column BLxBL
add column BRxBR
Force Index(2)is increasing
average volume(90)is above 100000
volume is above 100000
sort column 3 DESCENDING
date offset is 2/15/06

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE momentum(12) */

set{moval, INDPOSITION(momentum(12), 60) * 100}

/* NORMALIZE CCI(14) */

set{ccval, INDPOSITION(CCI(14), 60) * 100 }

/* NORMALIZE williams %r(10) */

set{wrval, INDPOSITION(williams %r(10), 60) * 100 }


/* DRAW THE MP CCIWLR CHART */

and draw wrval
and draw adval on plot wrval
and draw moval on plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column moval
add column wrval

adval is Above 80
ccval is Below 30
moval is Below 30
wrval is Below 30

adval is increasing
ccval is increasing
moval is increasing
wrval is increasing
]





RIGGS

















WALLSTREETGENIUS
983 posts
msg #41761
Ignore WALLSTREETGENIUS
modified
3/13/2006 3:07:13 AM

Avery -

How many times do you need to "respond" to the same post? Look, I promised "tom" that things are going to be different when it comes to my posting style, so if you're here to gain some of your old friends back.... that's fine....but let's again "pretend we never met" okay? Beleive me when I say this...YOU'RE NOT NEEDED HERE. So go help 'navyman' with his "hammer" filter.

As for me "challenging you to a trading contest" you remember.....it was on that filter that read "This filter will make you forget all about RSI(2)." Only "tomb" whacked half of the thread. It had about 100 posts on it. Remember? Well, your only responce to my challenge went like this...."you're funny riggs." And my responce to you was..."That's just what I thought you'd say TRO!" Now do you remember? How soon we forget.

about the comment "I didn't realize it was up to YOU to decide what this forum is about!" It was nothing more than my opinion. And we all know "riggs" has an opinion on many things. So again Avery, I know you're bitter about your failed filters, but let's do less communicating okay. I'm grateful for what I learned from you, but but less grateful for your greed, and we both know what I'm talking about. I do wish you luck and continued success in all your endeavors.


Fetcher[
Fetcher[show stocks where close is above 40
60 day slope of close is above 0
Do not draw 60 day slope of close
draw EMA(13)
Set{Bullpower, high minus ema(13)}
Set{Bearpower, low minus ema(13)}
set{BLb,days(BullPower is above BullPower 1 day ago,100)}
set{BLa,days(BullPower is below BullPower 1 day ago,100)}
set{BLxBL, BLa - BLb}
set{BRb,days(BearPower is above BearPower 1 day ago,100)}
set{BRa,days(BearPower is below BearPower 1 day ago,100)}
set{BRxBR, BRa - BRb}
Bullpower has been decreasing the last 1 day
Bearpower has been increasing the last 1 day
Bearpower is below 0
Draw Bullpower
Draw Bearpower
add column BLxBL
add column BRxBR
Force Index(2)is increasing
average volume(90)is above 100000
volume is above 100000
sort column 3 DESCENDING
date offset is 2/15/06

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE momentum(12) */

set{moval, INDPOSITION(momentum(12), 60) * 100}

/* NORMALIZE CCI(14) */

set{ccval, INDPOSITION(CCI(14), 60) * 100 }

/* NORMALIZE williams %r(10) */

set{wrval, INDPOSITION(williams %r(10), 60) * 100 }


/* DRAW THE MP CCIWLR CHART */

and draw wrval
and draw adval on plot wrval
and draw moval on plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column moval
add column wrval

adval is Above 80
ccval is Below 30
moval is Below 30
wrval is Below 30

adval is increasing
ccval is increasing
moval is increasing
wrval is increasing
]







RIGGS.














WALLSTREETGENIUS
983 posts
msg #41767
Ignore WALLSTREETGENIUS
modified
3/13/2006 3:08:01 AM

Let's now see if we can stay focused on the filter. Enough of the bickering already! Let's just make $Money$ okay?

Here it is again with a slight modification.....

what you need to look for is the "adval" to be above 75 and the other 3 RSVAL, WRVAL, MOVAL to be below 30! When this happens there will be a POP! When "ADVAL"(Accumulation Distribution)is well above the other 3, it's much like DMA in that it's ringing a bell to get the other indicators up there as well.

So what are you looking for? First look at the 4 "columns." rsval, adval, moval, wrval. You want the "adval" to be above 75, and again the other three to be below 30. Then you want to look at your Bullpower/Bearpower indicators. If Bullpower is decreasing or flat, and Bearpower is INCREASING from below "0", that is your entry signal! Take a look for yourself. Also, if you see divergence between Bull & Bear Power, then you are looking at a "long" position! So all of this has been coded for you. DO NOT EVER AGAIN UNDERESTIMATE BULLPOWER/BEARPOWER! I told all of you a couple of months ago that I would find a way to incorporate this indicator into the right filter and this is it!!!



Fetcher[
Fetcher[show stocks where close is above 40
60 day slope of close is above 0
Do not draw 60 day slope of close
draw EMA(13)
Set{Bullpower, high minus ema(13)}
Set{Bearpower, low minus ema(13)}
set{BLb,days(BullPower is above BullPower 1 day ago,100)}
set{BLa,days(BullPower is below BullPower 1 day ago,100)}
set{BLxBL, BLa - BLb}
set{BRb,days(BearPower is above BearPower 1 day ago,100)}
set{BRa,days(BearPower is below BearPower 1 day ago,100)}
set{BRxBR, BRa - BRb}
Bullpower has been decreasing the last 1 day
Bearpower has been increasing the last 1 day
Bearpower is below 0
Draw Bullpower
Draw Bearpower
add column BLxBL
add column BRxBR
Force Index(2)is increasing
average volume(90)is above 100000
volume is above 100000
sort column 3 DESCENDING
date offset is 2/15/06

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE momentum(12) */

set{moval, INDPOSITION(momentum(12), 60) * 100}

/* NORMALIZE CCI(14) */

set{ccval, INDPOSITION(CCI(14), 60) * 100 }

/* NORMALIZE williams %r(10) */

set{wrval, INDPOSITION(williams %r(10), 60) * 100 }


/* DRAW THE MP CCIWLR CHART */

and draw wrval
and draw adval on plot wrval
and draw moval on plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column moval
add column wrval

adval is Above 80
ccval is Below 30
moval is Below 30
wrval is Below 30

adval is increasing
ccval is increasing
moval is increasing
wrval is increasing
]





RIGGS












WALLSTREETGENIUS
983 posts
msg #41773
Ignore WALLSTREETGENIUS
modified
3/13/2006 3:08:57 AM

Avery -

Kindly post your elemantary & redundant free literature on your own threads PLEASE. Do you mind? I would appreciate it.... This thread is reserved for seasoned traders that don't have to read that stuff anylonger. Do you think anyone actually learned anything from that post? Hey "chicken," the only way newbie's are going to learn anything around here, is by me wiping you up off the floor in a trading contest! ROFLMAO!!!!!!!! So spray paint your graffiti where it might be useful. But in the mean time, have a WONDERFUL day! LOL....


Fetcher[
Fetcher[show stocks where close is above 40
60 day slope of close is above 0
Do not draw 60 day slope of close
draw EMA(13)
Set{Bullpower, high minus ema(13)}
Set{Bearpower, low minus ema(13)}
set{BLb,days(BullPower is above BullPower 1 day ago,100)}
set{BLa,days(BullPower is below BullPower 1 day ago,100)}
set{BLxBL, BLa - BLb}
set{BRb,days(BearPower is above BearPower 1 day ago,100)}
set{BRa,days(BearPower is below BearPower 1 day ago,100)}
set{BRxBR, BRa - BRb}
Bullpower has been decreasing the last 1 day
Bearpower has been increasing the last 1 day
Bearpower is below 0
Draw Bullpower
Draw Bearpower
add column BLxBL
add column BRxBR
Force Index(2)is increasing
average volume(90)is above 100000
volume is above 100000
sort column 3 DESCENDING
date offset is 2/15/06

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE momentum(12) */

set{moval, INDPOSITION(momentum(12), 60) * 100}

/* NORMALIZE CCI(14) */

set{ccval, INDPOSITION(CCI(14), 60) * 100 }

/* NORMALIZE williams %r(10) */

set{wrval, INDPOSITION(williams %r(10), 60) * 100 }


/* DRAW THE MP CCIWLR CHART */

and draw wrval
and draw adval on plot wrval
and draw moval on plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column moval
add column wrval

adval is Above 80
ccval is Below 30
moval is Below 30
wrval is Below 30

adval is increasing
ccval is increasing
moval is increasing
wrval is increasing
]





RIGGS













StockFetcher Forums · Filter Exchange · This Is The Last Filter You Will Ever Need Part III<< 1 ... 2 3 4 5 6 >>Post Follow-up

*** Disclaimer *** StockFetcher.com does not endorse or suggest any of the securities which are returned in any of the searches or filters. They are provided purely for informational and research purposes. StockFetcher.com does not recommend particular securities. StockFetcher.com, Vestyl Software, L.L.C. and involved content providers shall not be liable for any errors or delays in the content, or for any actions taken based on the content.


Copyright 2022 - Vestyl Software L.L.C.Terms of Service | License | Questions or comments? Contact Us
EOD Data sources: DDFPlus & CSI Data Quotes delayed during active market hours. Delay times are at least 15 mins for NASDAQ, 20 mins for NYSE and Amex. Delayed intraday data provided by DDFPlus


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.